Motorola original Minitor VI battery pack.Select either "Standard" or "Intrinsically Safe" when ordering. The Intrinsically Safe (UL) version is only used on an Intrinsically Safe pager.To determine if your pager is Intrinsically Safe look at the white label on the back (with battery removed). It it..
Motorola original Minitor VI battery tray.Uses 3 AAA batteries. Not rechargeable.Note: If you have an IS Minitor VI pager and use this battery tray the pager will no longer be certified Intrinsically Safe.Quantity discounts available...
Motorola Minitor VI (6) amplified charger with power supply.The amp charger has a relay and an audio jack on the back.Select band split when ordering to receive the correct antenna...
Motorola original Minitor VI nylon carry case with belt loop. Pager not included.Note this case is specific to the Minitor 6 pager and will not fit a Minitor 7 pager (it's too tall)...
Minitor VI pager programming cradle with cables.This is the nest the pager sits in when you program the pager. On the back is a USB connector that plugs into your computer.The Minitor 6 software is downloadable from Motorola for free. The software is located under "Resources Spotlight" on ..
Motorola original Minitor VI pager clip with spring action.This is a Minitor VI clip with the attachment than connects to the back of the pager. The rear housing is not included.Quantity discounts available...
Motorola Minitor VI standard charger with power supply. This is a
brand new Motorola Minitor VI charger with a one year warranty.The
charger can be plugged into the wall with the included power supply or
the charger can be plugged into any USB outlet with an optional USB
cable.Amplified char..
New original Motorola knobs for the Minitor 6 pager. These knobs also fit the Minitor 7 pager, although they are only sold as Minitor 6 knobs from Motorola.Difficulty level 2 to install, on a 1-10 scaleChoose either the volume for selector knob (both shown in the picture for reference). If you need..
New original Motorola rear housing for the Minitor 6 pager.Difficulty level 3 to install, on a 1-10 scale.Replacing
the back housing can be done without much difficulty, but it's
recommended that only a trained technician replace the housing.You will need a Torx 6 bit to remove the rear housing...
New original Motorola front housing for the Minitor 6 pager.Difficulty level 10 to install, on a 1-10 scaleReplacing
the front housing is not easy, it's recommended that only a trained
technician replace the front housing. This is the most difficult part to
replace on the pager, and should no..
New original Motorola Stored Voice push pad for the Minitor 6 pager.Difficulty level 9 to install, on a 1-10 scaleReplacing
the push pad is difficult, it's recommended that only a trained
technician replace it. You can easily damage the pager attempting to
replace this part.A crab eye nut ope..
New original Motorola speaker for the Minitor 6 pager. This also works on the Minitor 7 pagers, but this speaker is only sold as a Minitor 6 speaker from Motorola.Difficulty level 9 to install, on a 1-10 scaleReplacing
the speaker is difficult, it's recommended that only a trained
technician re..