Brand: Motorola Solutions, Inc.
Model: Minitor 7 battery
Motorola original Minitor 7 battery pack, Intrinsically Safe (UL).If you have a Minitor 7 pager and don't use an IS battery, the pager will no longer be certified Intrinsically Safe. All Minitor 7 pagers come as Intrinsically Safe from the factory.Quantity discounts available.Note this battery is th..
$33.00
Brand: Motorola Solutions, Inc.
Model: Minitor 7 amp charger
Motorola Minitor 7 amplified charger with power supply.The amp charger has a relay and an audio jack on the back.Select band split when ordering to receive the correct antenna...
$180.00
Brand: Motorola Solutions, Inc.
Model: Motorola Minitor 7 nylon case
Motorola original Minitor 7 nylon carry case with belt loop. Pager not included...
$39.50
Brand: Motorola Solutions, Inc.
Model: Minitor 7 programmer
Minitor 7 pager programming cradle with cable. This is different than the Minitor 6 programmer, so you will need to buy a Minitor 7 programmer, to program a Minitor 7 pager.This is the nest the pager sits in when you program the pager. On the back is a USB connector that plugs into your computer. In..
$165.00
Brand: Motorola Solutions, Inc.
Model: Minitor 7 belt clip
Motorola original Minitor 7 pager clip with spring action.This is a Minitor 7 clip with the attachment than connects to the back of the pager. The rear housing is not included.Quantity discounts available...
$25.00
Brand: Motorola Solutions, Inc.
Model: Minitor 7 standard charger
Motorola Minitor 7 standard charger with power supply. This is a
brand new Motorola Minitor 7 charger with a one year warranty.The
charger can be plugged into the wall with the included power supply or
the charger can be plugged into any USB outlet with an optional USB
cable.Amplified charge..
$84.50
Brand: Motorola Solutions, Inc.
Model: Minitor 6 & 7 knob
New original Motorola knobs for the Minitor 6 pager. These knobs also fit the Minitor 7 pager, although they are only sold as Minitor 6 knobs from Motorola.Difficulty level 2 to install, on a 1-10 scaleChoose either the volume for selector knob (both shown in the picture for reference). If you need..
$14.50
Brand: Motorola Solutions, Inc.
Model: Minitor 6 & 7 speaker
New original Motorola speaker for the Minitor 6 pager. This also works on the Minitor 7 pagers, but this speaker is only sold as a Minitor 6 speaker from Motorola.Difficulty level 9 to install, on a 1-10 scaleReplacing
the speaker is difficult, it's recommended that only a trained
technician re..
$38.50
Brand: Motorola Solutions, Inc.
Model: Crab nuts
New original Motorola crab nuts (one pair). These are the nuts under the knobs, they hold the internal switch to the housing. The two nuts are the same, and are interchangeable between the two knobs.The nuts are not difficult to replace. To replace - the black plastic knob must be removed (pulled of..
$13.50
Brand: Motorola Solutions, Inc.
Model: Minitor 6 & 7 vibrator
New original Motorola vibrator for the Minitor 6 pager. This also works on the Minitor 7 pagers, but this vibrator is only sold as a Minitor 6 vibrator from Motorola.Difficulty level 3 to install, on a 1-10 scaleReplacing the vibrator can be done without much difficulty, but
it's recommended that ..
$37.50
Brand: Motorola Solutions, Inc.
Model: Minitor 6 & 7 screws (pack of 5)
New original Motorola screws (pack of 5) for the Minitor 6 pager back
housing. Also includes the rubber covers for the screw holes.Note these also fit the Minitor 7 pagers, but the longer black plug is slightly different. The Minitor 7 parts are not available.You will need a Torx 6 bit. Carefully ..
$17.50
Brand: Motorola Solutions, Inc.
Model: Crab eye-nut opener tool
New Crab eye-nut opener tool for the Minitor 6 and 7 pagers.This tool is used to remove/tighten the nuts that hold the volume and channel selector knob in place.Without this tool the nuts may be too tight to remove.Without this tool you may not be able to tighten down the nuts with enough force to p..
$115.00
Showing 1 to 12 of 12 (1 Pages)