Knob

Brand New Motorola original Minitor V knob. Choose either the volume for selector knob. If you need both, add 1 knob of each to your cart. The picture shows the stored voice selector knob.

Also works on the Minitor IV pagers.

This knob can be difficult to replace. Typically the pager needs to be disassembled, then the circuit board removed. The old knob can be cut out with a dyke (wire cutter) from the inside. If you are not able to do this it is recommended you send in the pager for repair by Downloading the repair form.

You may also need the black plastic coupler that connects the knob to the switch inside the pager (not shown in the picture). This part sometimes cracks and needs to be replaced at the same time the knob is replaced. If you need the coupler add it to your cart below.

*This part should only be installed by a trained qualified technician. We provide no technical support for this item beyond our web site.